First install the work piece tooling (elbow box) on the work surface, and place the turned elbow
on it. Then, a needle
-
shaped pointer is mounted on the rotatable part of the power head (usually
attracted to the top of the cutter head by a magnet) for adjusting the concentricity between the
two ends of the tooling and the power head cutter head. Since the worktable on which the work
tool is installed can be moved up and down, moved back and forth, and rotated, it is very
convenient to adjust the concentricity of the tool and the cutter head. When the adjustment is
completed, the upper part of the work tool is pressed down to adjust the appropriate upward
stroke of the oil cylinder. Then measure the length difference between the processed elbow and
the unprocessed elbow, enter it into the computer, and adjust the appropriate processing speed.
The machining operation is ready
. The displayed manual should be done automatically, and then
press processing