(1) The hole type does not matchThere are two-roller, three-roller and four-roller weld seam extrusion structures. As long as the combined hole shapes do not match, it is easy to cause scratches on the surface of the tube blank, especially the two-roller structure.There are many factors that cause t
Square cold-formed hollow section steel is a section steel with square cross-section shape and size made of hot-rolled steel plate after cold-bending and then high-frequency welding. It is also called welded square steel pipe. The section steel has a stable production process and high precision, and
The specific process flow of high-frequency welded pipe equipment is as follows: open the end of the steel coil, straighten it and send it to the subsequent equipment. After uncoiling, the strip is flattened, the head and tail are cut, the material is cut with a disc, and the tape is rewound. The ra
Correct installation steps of high frequency welded pipe machine1. Transfer: A forklift should be selected to transfer the high-frequency pipe welding machine.2. Equipment: The machine should be fixed horizontally on a stable foundation and grounded.3. Oil filling: Open the back cover of the chassis
The appearance of gaps refers to the phenomenon that the welds are not bonded together. The length of the gaps is generally more than a few centimeters or even longer. The main reasons are as follows:(1) Pass wearAs the extrusion roll hole pattern wears, the hole pattern (R) size gradually becomes l
Sand-hole pipes are also a kind of quality accident caused by weld leakage, but their gaps are very small, some of them cannot be directly observed by human eyes, and must be found through testing equipment, so we call this kind of pipes sand-hole pipes. The main reasons for sand hole pipes are as f
(1) The hole type does not matchThere are two-roller, three-roller and four-roller weld seam extrusion structures. As long as the combined hole shapes do not match, it is easy to cause scratches on the surface of the tube blank, especially the two-roller structure.There are many factors that cause t