CZ Purlin Roll Forming Machine
Product Description
Forming host
(1) Forming line speed: 18m/min (2) Forming passes: 12 passes
(3) The archway is a three-dimensional cast iron archway, with chain transmission
(4) Shaft diameter: medium 55mm, material: 40Cr, quenched and tempered, HB240-280
(5) Forming roll: GCr15, quenched, HRC58~62°
(6) Main motor power: 5.5kw
(7) The fuselage is the main body of the rolling mill. It is made of thick square tube 60*100 steel and iron plate welded by numerical control. It is firm and beautiful. The base is equipped with adjusting bolts for adjusting the horizontal position of the fuselage. Easy to install and transport
(8) One set of calibration device, discharge height 850mm (9) One plunger pump station, 3kw
| Manufacture: | Tengdi Machinery | Name: | CZ Purlin Roll Forming Machine |
| Use: | photovoltaic forming machine | Production Capacity: | 10-15m/min |
| Voltage: | 380V 50Hz 3phases | Dimension(L*W*H): | 13000*1500*1670mm |
| Weight: | 14 Tons | Control system: | PLC with touch screen |
| Place of Origin: | Shijiazhuang, China | Cutting blade material: | Cr 12 High Grade Steel |
| Roller material: | Gcr15 steel with quenching | Shaft material: | 45#steel |
| After-sales Service Provided: | Engineers available to service machinery overseas | ||
One solar photovoltaic panel strut roll forming machinecan produce several shape products as panel profile. The different size of channel is adjusted by the spacers between up and downside rollers. Because the design of these spacers is half circle, then two joint together, so when adjusting, needn't remove the rollers, it is very easy and convenient.when change different specification, need to change the cutting mould.
Decoiler--Feeding and Leveling--Punching--Main roll forming--Hydraulic cutting----Output table
Q: Are you manufacturer?
A: Yes. We are manufacturer. We have our own technical team. Welcome to visit us.
Q: What payment terms do you accept?
A: We are flexible on payment terms, please contact us for details!
Q: What info you need before you make the proposal?
A: The pipe diameter and thickness range which you need or the profile drawings material information, your special requirements and speed of the machine.
Q: How do you do QA?
A: We have special team do strict QA, this is our strengths:
(1)Every gear box will be tested for 8 hours with oil inside to guarantee there is no leak.
(2)Every shaft will be inspected for the centering jumpiness.
(3)Every roller will be checked to make sure it is in the range of tolerance critical parts will be inspected for all dimensions.
Q: Why choose you? What is the difference between you and other Chinese supplier?
A: You can get higher quality product & better professional service from TENGDI with same price.
Q: What I should do if just start a new business?
A: Contact us immediately, we provide free consultant pre-sales service
Q: How about your service?
A:Our services include:
(1)Warranty is one year, Any parts damaged during warranty will be replaced for free!
(2)We provide spare parts for life time at cost price. Electrical parts such as boards and servo drives, we'll provide them for life time as well at cost price.
(3)We provide Video technical support, Field installation, commissioning and training, online support, Engineers available to service machinery overseas.